Sling psychrometer
A sling psychrometer holds a wet-bulb thermometer and a dry-bulb thermometer. A dry-bulb thermometer is an ordinary thermometer, whilst a wet-bulb thermometer is a thermometer that has its bulb wrapped in cloth and moistened with distilled water.
When a sling psychrometer is swung round in the air, moisture will evaporate from the wet-bulb thermometer, reducing its temperature depending on the humidity of the air it is exposed to. The higher the humidity, the lower the rate of evaporation and so the higher the temperature recorded. Wet-bulb temperatures are the same as dry-bulb temperatures at a relative humidity of 100%, but otherwise will be lower than dry-bulb temperatures due to the cooling effect of evaporation (described as wet-bulb depression).
The two thermometers should give steady-state readings after a few minutes.
A sling psychrometer can be used to determine the physical and thermal properties of moist air by using standard tables and charts. Typically it is used to determine relative humidity. Some sling psychrometers include mechanisms to allow relative humidity to be read directly without needing to refer to tables.
Psychometric charts are complex graphs that represent the dry-bulb temperature, wet-bulb temperature, relative humidity, specific volume, dew point temperature, humidity ratio and enthalpy of moist air at known atmospheric pressure. The state of moist air can be determined from any two of these properties (such as wet-bulb temperature and dry-bulb temperature which can be read on a sling psychrometer) from which all other properties can then be determined.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
The act of preservation may sometimes be futile.
Twas the site before Christmas...
A rhyme for the industry and a thankyou to our supporters.
Plumbing and heating systems in schools
New apprentice pay rates coming into effect in the new year
Addressing the impact of recent national minimum wage changes.
EBSSA support for the new industry competence structure
The Engineering and Building Services Skills Authority, in working group 2.
Notes from BSRIA Sustainable Futures briefing
From carbon down to the all important customer: Redefining Retrofit for Net Zero Living.
Principal Designer: A New Opportunity for Architects
ACA launches a Principal Designer Register for architects.
A new government plan for housing and nature recovery
Exploring a new housing and infrastructure nature recovery framework.
Leveraging technology to enhance prospects for students
A case study on the significance of the Autodesk Revit certification.
Fundamental Review of Building Regulations Guidance
Announced during commons debate on the Grenfell Inquiry Phase 2 report.
CIAT responds to the updated National Planning Policy Framework
With key changes in the revised NPPF outlined.
Councils and communities highlighted for delivery of common-sense housing in planning overhaul
As government follows up with mandatory housing targets.